• Restorer Ultimate Documentation

Home  > File Recovery > Data Recovery from Volume Sets and RAIDs  > Checking RAID Consistency

Checking RAID Consistency


You may check RAID consistency (whether the data parity values are valid) for RAID layouts with parity blocks.

To check RAID consistency,

1 Select the RAID which consistency you want to check on the Restorer Ultimate Device/Disk list panel and click the Next button
2 Select Check RAID for consistency and click the Next button
Click to enlarge

Select a required file recovery action... panel

> The RAID consistency check window will appear showing the progress.
Click to enlarge

RAID consistency check window

When the check is finished, you may inspect the results.

Block color

 

Green

Data parity values are valid.

Red

Data parity values are not valid.

White

0's

When a mouse pointer hovers over a block, a tooltip will show the sector range within the block and number of consistent and inconsistent sectors. Double-clicking the block moves it to the upper-leftmost corner and zooms in the data by 2.

Click to expand/collapse RAID consistency check controls

Sectors

The number of the first sector in the row.

Offset

Offset in the data. Enter the address you want to jump to and press the Enter key.

Sectors/Bytes/KB...

Specifies the dimension of the data in the Offset field.

Previous/Next

Moves to the previous/next part of the data.

+/-

Zooms into/out of, the data.

© Copyright 2000-2022 Bitmart Inc.